b.Enter the correct user name and password to access the Configuration tool. The default user name and password are as below.
User Name : admin
Password : password
Note: You must click the Submit button on every page that you make changes on and when you have made all your changes click the Save Setting and Reboot button from the bottom of the menu.
c.Click on the One Page Setup link under the Basic menu. You do not need to change the LAN settings unless you need the NB1300 to work with an existing network on a subnet other than 192.168.1.x.
Gateway Ethernet
You will need to Change your WAN and VC settings as provided by your ISP. The following lists an example of the most common ISP settings used in Australia. The fields that require changing from the default settings are highlighted.
www.netcomm.com.au | Rev. 1- YML672 |
Page 24 | NB1300_2 ADSL Modem |