Advanced
RIP Configuration
The RIP Per Interface Configuration page allows the user to set the configuration for each Interface (PVCs, PPP Sessions, USB and LAN).
Interface: This field allows the user to choose the Interface (PVCs, PPP Sessions, USB and LAN), for the RIP to be configured.
Enable: This field allows the user to Enable (Yes) or Disable (No) the specified interface for RIP.
Supplier: This field allows the user to select the Supplier Mode (RIP Transmit).
❏Disabled: The supplier transmit is disabled.
❏V1 BC: The supplier transmits in RIPv1 Broadcast.
❏V2 BC: The supplier transmits in RIPv2 Broadcast.
❏V2 MC: The supplier transmits in RIPv2 Multicast.
Listener: This field allows the user to select the Listener Mode (RIP Receive)
❏V1: The listener receives the RIPv1 only.
❏V2: The listener receives the RIPv2 only.
❏V1+V2: This listener receives the both RIPv1 and RIPv2.
Supplier and Listener are based on section 4.1 "Compatibility Switch" in RFC 1723. Current RIP Settings: This field displays the each interface's RIP status.
www.netcomm.com.au | Rev. 1- YML672 |
Page 50 | NB1300_2 ADSL Modem |