Overview Section
LED Indicators
The LED Indicators are located on the front of the unit, they are green in colour. The meanings are as follows:
Label | Meaning | Status | Indicates: |
PWR | Power | On | Power is on |
|
| O f f | Power is off |
RDY | Ready | Flashing | Unit is powered up correctly when pulsing steadily. |
|
|
| ON or OFF during reboot or when unit switched |
|
|
| OFF. If ON or OFF permanently then there is an |
|
|
| error. Try powering unit OFF then ON after a |
|
|
| minute. |
WAN LNK | WAN Link | Flashing | Link being attempted by router. |
|
| On | Link established |
|
| O f f | No link |
WAN RXD | WAN Receive Data | Flashing | Flashes when receiving or sending data on the WAN |
|
|
| port (ADSL line) |
|
| O f f | No data being sent or received |
LAN ACT | LAN Activity | Flashing | Flashes when data is being sent or received on the |
|
|
| LAN connection |
LAN LNK | LAN Link | On | Indicates a link to your LAN or Network card is |
|
|
| active. |
|
| O f f | Indicates no link to LAN |
www.netcomm.com.au | Rev. 1- YML672 |
Page 8 | NB1300_2 ADSL Modem |