Registers, Ascii | NetComm IG6000 instruction

S Registers

Reg	Range	Def	Unit	Function
0	0255	00	rings	Rings Before Answer
1	0255	00	rings	Ring Count
2	1255	43(+)	ASCII	Escape Sequence Character
3	0127	13	ASCII	Carriage Return Character
4	0127	10	ASCII	Line Feed Character
5	0127	08	ASCII	Backspace Character
6	47	04	secs	Wait for Dial Tone
7	160	30	secs	Wait for Carrier
8	17	04	secs	Delay for Pause Modifier
9	1255	06	0.1secs	Carrier Detect Response Time
10	1255	18	0.1secs	Lost Carrier/Hang Up Delay
11	70254	95	msecs	Touch Tone Timing
12	3255	50	0.02secs	Escape Sequence Guard Time
16	08	00		Test in Progress (read only)
18	0255	00	secs	Test Timer
25	0255	05	0.01secs	DTR Loss Detection Time
26	0255	00	0.01secs	RTSCTS Delay
27	0255	00	secs	Delay Before Security Dialback
29	10100	50	0.01secs	Hook Flash Duration (also sets S100)
30	0255	00	10secs	Inactivity Timer (data mode)
33	0255	03		EQM Threshold for V.32/V.32bis
38	0255	00	secs	Disconnect Delay
42	0255			Modem Disconnect Reason
43	0255	15	msecs	Break Sequence Length
45	0255	98		EQM Threshold V.22/V.22bis/212A
47	1255	08	secs	AutoRange Time
62	0255	75	0.01secs	V.42 detection timer
69	0255	60	secs	Command line timeout
74	0255			Modem Disconnect Reason (Previous Call)
80	119	15	5%	Flow Control High Water Mark
81	119	03	5%	Flow Control Low Water Mark
82	1255	60		Failsafe Flow Control Overrun
95	063	0	bitmap	Extended Result Codes
96	1255	80		Help Page Width
97	1255	24		Help Page Length
100	110	5	100msecs	Hook Flash Duration (also sets S29)
105	0255	30	secs	Voicemode ÒDeadmanÓ timer
110	0255	4	rings	Voicemode Rings before Answer
119	0255	0	secs	Power Down Feature

Use AT? to see the Command Set supported by your modem's version of code.

YML3913A