SERVER
2.9.6NMEA transducers
NMEA compass, NMEA wind, NMEA log and NMEA depth transducer may be used.
Green
Yellow
White
Screen
You must know which 2 cables from your other NMEA transducer carry the NMEA out signal. If you have trouble call the dealer you bought your NMEA instrument from. He should know the wiring colour and will probably sell the ”plug set” which may be required. We do not have this information.
Connect NMEA out signal from the NMEA transducer to Server pin 10 (INPUT A). Connect NMEA return signal from the NMEA transducer to Server pin 11 (INPUT B).
Note a: The Server allows only one NMEA transducer or instrument connected to the input pins 10 and 11.
Note b: Make sure the calibration codes C73, C74, C75 and C76 (See Multi Control Manual) for NMEA transducers are correctly set.
17