Nexus 21 NX2 Server, Error messages, The following error messages can appear on the display

Page 27
3.2.3Error messages

SERVER

If the LED is constantly off, check the connections. Or the mounting of the transducer.

2.Unstable or erratic readings. Can happen in the following cases:

When going over shoal water, with uneven and high bottom vege-tation.

In heavy layers of salt or noticeable ranges of water temperatures.

In heavily agitated water containing particles of sand or some other contamination.

The bottom of the transducer may be painted with anti fouling for protection against weed growth. It is recommended the transducer is cleaned at regular intervals depending on what kind of waters you boat in.

Weed on the transducer can cause either no reading or unstable readings.

In general when a boat is moored in a harbour with other boats around, there can be disturbances from signals from other depth transducers, chains or other mooring equipment, which will result in wrong depth readings.

3.2.3Error messages

The following error messages can appear on the display:

ERROR 2 Nexus Network is missing, check colour coded connections

ERROR 3 No data received within a given time.

ERROR 10 Range error caused by bad format e.g. 17° 70' East.

ERROR 11 Remote command that can not be performed.

ERROR 12 No response from, or missing navigator.

ERROR 13 Waypoint not defined.

ERROR 15 Functions not allowed in autopilot mode.

ERROR 16 Automatic deviation not possible due to NMEA compass selected.

ERROR 17 Automatic deviation check failed. Turn not completed, error larger than 1,5°.

ERROR 19 The boat probably hit a wave during turn. Error larger than 1,5°.

If other error messages than the above appears on the Multi Control instrument, contact your Nexus dealer.

26

Image 27
Contents Server Installation and Operation Manual English EnglishSERVER Edition March This manual is written for NX2 Server version 2.00Specifications Part specificationInstallation Maintenance and fault finding1 Part specification Items delivered with the ServerRegistering this product Welcome aboard the Nexus Network Good luck and happy boatingTypical NX2 system 2 Installation 2.1 Location of the Server 2.2 Installing the ServerYour Server installation is done 2.3 Installing the transducers2.4.2 Tactical function push-button 2.4 Connecting optional accessories2.4.3 Extra alarm buzzer 2.4.1 Man over board MOB push-button2.4.4 NX2 instruments 2.6 How to use the NMEA ports 2.5 Connecting instrument lighting2.7 Connecting a NMEA instrument IN to the Server 3 A fuse Red Black 2.8 Connecting a NMEA instrument OUT from Server2.9 Compatibility with our previous transducers 2.9.1 Log transducer2.9.2 Depth transducer Only the Nexus version can be used 2.9.3 Wind transducerAll our wind transducers can be used 2.9.4 Compass transducer2.9.6 NMEA transducers 2.10.1 Transmit NMEA sentences OUT from Server 2.10 NMEA2.10.2 Change NMEA sentences OUT from Server Autopilot sentence ”A” For connection of NMEA instrument IN to Server, see 2.11.1 Baudrate control 2.11 Special NMEA sentences$PSILTBS,X.X,NCRLF $PSILCD1,X.X,X.X,CRLF3 Maintenance and fault finding 3.1 Maintenance3.2 Fault finding 2. Compass No reading 3.2.2 Fault - action 1. Speed and distance functions No reading4. What you should know about digital depth sounders 3. Wind No readingThe following error messages can appear on the display 3.2.3 Error messages4 Specifications 4.1 Technical specifications4.2 Nexus databus introduction and user policy NX2/Nexus Transducers 4.3 Optional AccessoriesNexus Remote Control Instrument NX2 CompletesNexus Multi XL NX2 GPSNexus Autopilot components CLAIMS PROCEDURE 5 WarrantyWARRANTY GENERAL LIMITED WARRANTYDealers stamp WARRANTY CARDDate of purchase Date installed File idTel +46 -0 8 - 506 939 00. Fax +46 -0 8 -506 939 CopyrightNexus Marine AB Kuskvägen 4, 191 62 Sollentuna, Sweden