Nexus 21 NX2 operation manual Installing the transducers, Your Server installation is done

Page 10
Your Server installation is done!

SERVER

Note: If the cable must be cut, it is recommended it is cut at the unmarked cable end, since a marked cable is easier to identify.

When all connections are made, use the cable straps as required. Mount the Server cover using the 2 mounting screws.

Your Server installation is done!

2.3Installing the transducers

Log, depth, wind and compass transducers are all connected to the pins on the right hand side of the Server. They are all clearly colour coded and marked with numbers and names. Install the transducers according to the separate instructions supplied with each transducer. Connect as per below drawings

9

Image 10
Contents Installation and Operation Manual English English ServerSERVER This manual is written for NX2 Server version 2.00 Edition MarchMaintenance and fault finding Part specificationInstallation SpecificationsItems delivered with the Server 1 Part specificationRegistering this product Good luck and happy boating Welcome aboard the Nexus NetworkTypical NX2 system 2 Installation 2.2 Installing the Server 2.1 Location of the Server2.3 Installing the transducers Your Server installation is done2.4.1 Man over board MOB push-button 2.4 Connecting optional accessories2.4.3 Extra alarm buzzer 2.4.2 Tactical function push-button2.4.4 NX2 instruments 2.5 Connecting instrument lighting 2.6 How to use the NMEA ports2.7 Connecting a NMEA instrument IN to the Server 2.8 Connecting a NMEA instrument OUT from Server 3 A fuse Red Black2.9.1 Log transducer 2.9 Compatibility with our previous transducers2.9.2 Depth transducer 2.9.4 Compass transducer 2.9.3 Wind transducerAll our wind transducers can be used Only the Nexus version can be used2.9.6 NMEA transducers 2.10 NMEA 2.10.1 Transmit NMEA sentences OUT from Server2.10.2 Change NMEA sentences OUT from Server Autopilot sentence ”A” For connection of NMEA instrument IN to Server, see $PSILCD1,X.X,X.X,CRLF 2.11 Special NMEA sentences$PSILTBS,X.X,NCRLF 2.11.1 Baudrate control3.1 Maintenance 3 Maintenance and fault finding3.2 Fault finding 3.2.2 Fault - action 1. Speed and distance functions No reading 2. Compass No reading3. Wind No reading 4. What you should know about digital depth sounders3.2.3 Error messages The following error messages can appear on the display4.1 Technical specifications 4 Specifications4.2 Nexus databus introduction and user policy NX2 Completes 4.3 Optional AccessoriesNexus Remote Control Instrument NX2/Nexus TransducersNX2 GPS Nexus Multi XLNexus Autopilot components LIMITED WARRANTY 5 WarrantyWARRANTY GENERAL CLAIMS PROCEDUREFile id WARRANTY CARDDate of purchase Date installed Dealers stampKuskvägen 4, 191 62 Sollentuna, Sweden CopyrightNexus Marine AB Tel +46 -0 8 - 506 939 00. Fax +46 -0 8 -506 939