Nexus 21 NX2 operation manual Location of the Server, Installing the Server

Page 9

2.1Location of the Server

SERVER

2.1Location of the Server

The Server must be mounted on a dry, flat and vertical surface below deck , at least 500 mm (20") from radio receiving equipment.

Locate the Server in the centre of the boat and close to the electrical panel if possible.

2.2Installing the Server

Remove the Server cover from the base plate by removing the two screws. Drill the 4 screw holes using a 2.8 mm (0.11") drill. Mount the Server using the 4 mounting screws.

Apply silicon paste on the screw terminal. Connect the 8 m Nexus Network cable labelled number 5 and supplied with cable protectors to the Server on pins 5, 6, 7, and 8. Match the colour codes for each wire.

8

Image 9

Contents Server Installation and Operation Manual English EnglishSERVER Edition March This manual is written for NX2 Server version 2.00Installation Part specificationMaintenance and fault finding Specifications1 Part specification Items delivered with the ServerRegistering this product Welcome aboard the Nexus Network Good luck and happy boatingTypical NX2 system 2 Installation 2.1 Location of the Server 2.2 Installing the ServerYour Server installation is done 2.3 Installing the transducers2.4.3 Extra alarm buzzer 2.4 Connecting optional accessories2.4.1 Man over board MOB push-button 2.4.2 Tactical function push-button2.4.4 NX2 instruments 2.6 How to use the NMEA ports 2.5 Connecting instrument lighting2.7 Connecting a NMEA instrument IN to the Server 3 A fuse Red Black 2.8 Connecting a NMEA instrument OUT from Server2.9 Compatibility with our previous transducers 2.9.1 Log transducer2.9.2 Depth transducer All our wind transducers can be used 2.9.3 Wind transducer2.9.4 Compass transducer Only the Nexus version can be used2.9.6 NMEA transducers 2.10.1 Transmit NMEA sentences OUT from Server 2.10 NMEA2.10.2 Change NMEA sentences OUT from Server Autopilot sentence ”A” For connection of NMEA instrument IN to Server, see $PSILTBS,X.X,NCRLF 2.11 Special NMEA sentences$PSILCD1,X.X,X.X,CRLF 2.11.1 Baudrate control3 Maintenance and fault finding 3.1 Maintenance3.2 Fault finding 2. Compass No reading 3.2.2 Fault - action 1. Speed and distance functions No reading4. What you should know about digital depth sounders 3. Wind No readingThe following error messages can appear on the display 3.2.3 Error messages4 Specifications 4.1 Technical specifications4.2 Nexus databus introduction and user policy Nexus Remote Control Instrument 4.3 Optional AccessoriesNX2 Completes NX2/Nexus TransducersNexus Multi XL NX2 GPSNexus Autopilot components WARRANTY GENERAL 5 WarrantyLIMITED WARRANTY CLAIMS PROCEDUREDate of purchase Date installed WARRANTY CARDFile id Dealers stampNexus Marine AB CopyrightKuskvägen 4, 191 62 Sollentuna, Sweden Tel +46 -0 8 - 506 939 00. Fax +46 -0 8 -506 939