Nvidia TNT2 technical specifications Securing the graphics card to the slot

If you are using a multi- frequency monitor, you may need

aspecial 15-pin PS/2-compatible adapter cable. If your multi- frequency monitor allows you to switch between ‘TTL’ and ‘analog’ operation modes, set the switch to ‘analog’. For details, refer to your monitor’s manual.

8.Press the card’s bus connector gently and evenly into the slot, making sure that the bus connector comes into full contact with the slot. Then, secure the card to the computer casing with a screw. See Figure 3 below.

ii.Secure the card to the slot with a screw.

Warning: Do not force the graphics card into place. If it does not fit properly, gently remove it and try again.

i. Gently and evenly press the card’s bus connector into the slot.

Figure 3: Securing the graphics card to the slot.

9.Connect the monitor cable to the VGA Out connector of Graphics Blaster RIVA TNT2 Value, as shown in Figure 4.

VGA Monitor cable

VGA Out connector

VGA monitor

Graphics Blaster

RIVA TNT2 Value

Figure 4: Connecting your VGA monitor to Graphics Blaster RIVA TNT2 Value.

10. Replace the computer cover and plug the power cord back into the wall outlet.