Problems Using Software :KHQ\RXUHVWDUW:LQGRZVRQHRIWKHIROORZLQJHUURUPHVVDJHVDSSHDUV
❑“BlasterControl will only work on Creative graphics product drivers.
Do you want BlasterControl to be loaded the next time you start Windows?”
❑“BlasterControl will only work on Creative graphics product drivers.”
Cause Graphics Blaster RIVA TNT2 Value drivers, required by BlasterControl, may have been replaced by other drivers when you installed DirectX applications.
Solution
To revert to the drivers:
1.
2.In the Display Properties dialog box, click the Settings tab, and then click the Change Display Type button or the Advanced Properties button.
3.In the Adapter Type group box or on the Adapter tabbed page, click the Change button.
4.In the Select Device dialog box, click Graphics Blaster RIVA TNT2 Value, and then click the OK button.
5.In the Insert Disk message box, click the OK button without inserting any CD.
6.If Graphics Blaster RIVA TNT2 Value drivers and later versions of DirectX drivers are already installed, click the Skip File button until the Adapter Type group box or the Adapter tabbed page appears.
7.Click the two Close buttons to close the Display Properties dialog box.
8.When prompted to restart your system, click the Yes button.
After you have restarted your system, the newer DirectX drivers will work with the latest Graphics Blaster RIVA TNT2 Value drivers.