To install in Windows OSR version 2.0 and later

To install in Windows 95

5.In the Install From Disk dialog box, type D:\WINDOWS (where D: represents your CD-ROM drive) and click the OK button.

6.If prompted to select drivers, click the Graphics Blaster RIVA TNT2 Value drivers. The drivers are copied to your system.

7.When prompted to restart your system, click the Yes button.

8.After the system has restarted, proceed to install the applications. Click Start -> Run.

9.In the Run dialog box, type D:\WINDOWS\SETUP and click the OK button.

10.Follow the instructions on the screen to complete the setup.

If you do not install all the applications now, you can install them later.

1.Switch on your system.

Windows 95 automatically detects the graphics card.

A New Hardware Found message box appears, informing you that a display adapter has been detected.

2.When a dialog box similar to Figure 6 appears, click the Next button.

3.Click the Other Locations button when it appears in the Update Device Driver Wizard dialog box.

4.Insert the Graphics Blaster RIVA TNT2 Value CD into your CD-ROM drive.

5.In the Select Other Location dialog box, type D:\WINDOWS (where D: represents your CD-ROM drive) and click the OK button.

6. In the Update Device Driver Wizard	Figure 6: The Update Device Driver Wizard dialog box.
dialog box, click the Finish button.

7. In the Insert Disk message box, click the OK button.

Graphics Blaster RIVA TNT2 Value Installation Guide 7