[All ON]: All the LED lights on without any flashing effect.
[MODE 1 ~ MODE 7]: All the LED lights on with the flashing effect by one of these modes.
Temperature Monitoring
Click <Enter> key to enter its submenu:
| ABIT EQ | μGuru Utility v1.00C |
|
|
|
| ||
|
|
|
|
|
|
|
| |
| Temperature Monitoring | Shutdown |
|
| ||||
|
| Reading | Shutdown | Beep | Beep | |||
(*)CPU Temperature |
| Enable | Temp. | °F | Enable | Temp. | ||
41°C/105°F (*) | 85°/185° | (*) | 75°C/167°F | |||||
(*)System Temperature | 27°C/80°F | ( ) | 65° C/149° | °F | (*) | 55°C/131°F | ||
(*)PWM Phase1 Temperature | 40°C/104°F | ( ) | 135°°C/275°F (*) | 125°C/257°F | ||||
(*)PWM Phase2 Temperature | 40°C/104°F | ( ) | 135°°C/275°F (*) | 125°C/257°F | ||||
(*)PWM Phase3 Temperature | 40°C/104°F | ( ) | 135°°C/275°F (*) | 125°C/257°F | ||||
(*)PWM Phase4 Temperature | 38°C/100°F | ( ) | 135°°C/275°F (*) | 125°C/257°F | ||||
(*)PWM Phase5 Temperature | 39°C/102°F | ( ) | 135° C/275°F (*) | 125°C/257°F | ||||
(*)PWM Average Current | 54 A |
|
|
|
|
|
| |
(*)PWM Peak Current | 54 A |
|
|
|
|
|
| |
:Move Enter:Select | F10:Save ESC:Exit |
CPU, System, PWM Phase1~5 Temperature/PWM Current
These items display the temperature of CPU, System, and Power Module. Both the average and peak current of PWM will be displayed as well.
-Shutdown Enable
Use <Space> key to enable system shutdown function. If the CPU/System/PWM’s temperature exceeds the shutdown temperature limit, the system will shutdown automatically.
-Shutdown Temp.
This items sets the temperature that will shutdown the system automatically in order to prevent system overheating.
-Beep Enable
Use <Space> key to enable warning beeps function. Once the system has detected that the CPU/System/PWM’s temperature exceeded the beep temperature limit, warning beeps will sound.
-Beep Temp.
This item selects the warning temperature limit.
※The shutdown temperature must be set above the warning temperature.
IN9 32X/IN9 32X |