Nvidia IN9 32X-MAX user manual Power Management Setup

2.6 Power Management Setup

Phoenix – AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Suspend Type	S3(Suspend To RAM)
- USB Resume from S3	Disabled
Power Button Function	Instant-Off
Wake Up by PME# of PCI	Disabled
Wake Up by OnChip LAN	Enabled
Wake Up by Alarm	Disabled
X - Day of Month Alarm	0
X - Time(hh:mm:ss) Alarm	0 : 0 : 0
Power On Function	Button Only
X - KB Power On Password	Enter
X - Hot Key Power On	Ctrl-F1
Restore On AC Power Loss	Power Off
HPET Support	Enabled

Item Help

BIOS

‚€:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

ACPI Suspend Type

This item selects the type of Suspend mode.

-USB Resume from S3

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI Suspend Type” is set to [S3(STR)].

Power Button Function

This item selects the method of powering off your system:

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button.

[Instant-Off]:Pressing and then releasing the power button at once will immediately power off the system.

Wake Up by PME# of PCI

When set to [Enabled], access through the add-on PCI card can remotely wake up the system that was in Soft-Off condition. The PCI card must support the wake up function.

Wake Up by OnChip LAN

When set to [Enabled], access through the onchip LAN port can remotely wake up the system that was in Soft-Off condition.

Wake Up by Alarm

When set to [Enabled], you can set the date and time you would like the Soft-Off PC to power-on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alarm” items. However, if the system is being accessed by incoming calls or the network (Resume On Ring/LAN) prior to the date and time set in these items, the system will give priority to the incoming calls or network instead.

IN9 32X/IN9 32X-MAX 2-21

Setup