Multi-Tech Systems RF102S quick start Use Radius Server

Page 17

Software Installation

Use RADIUS Server

Select this option to authenticate your remote clients on a RADIUS server. Enter the following RADIUS Server Settings:

RADIUS Access Server IP Address: Enter the IP address of the RADIUS Access Server.

RADIUS Accounting Server IP Address: Enter the IP address of the RADIUS Accounting Server.

Secret: Enter your shared Secret RADIUS code or password.

Secret Verification: To confirm your Secret code, re- enter your code or password.

Note: In most cases, the RADIUS Access Server and the RADIUS Accounting Server are the same server, so the IP address will be the same.

Click Next and continue with Step 9.

17

Image 17
Contents Quick Start Guide Quick Start Guide Contents RouteFinder RF102S IntroductionRelated Documentation Unpacking your RouteFinder Hardware Installation Safety WarningsCabling the RouteFinder RF102S Cabling your RouteFinderPage Software Installation Software Installation and ConfigurationRouteFinder Setup Wizard RouteFinder ManagerRouteFinder Monitor Using RouteFinder Setup WizardClick Install Software Page Page Setup Wizard Device IP Address dialog box displays Page Use Local Client List Remote AccessPage Use Radius Server IP Routing NAT Enabled and IP Routing NAT Disabled Setup Wizard Modem Settings dialog box displays Setup Wizard DNS IP Address dialog box displaysPage Software Installation Testing your Connection Using Telnet to Configure your RouteFinder Configuring your Route FinderMulti-Tech Warranty & Repair Policies Limited WarrantyTechnical Support S0000137