Software Installation and Configuration

Software Installation

Before beginning the installation process, ensure that your system meets all hardware and software requirements:

•Intel 486 or higher processor.

•10/100 BaseT cable to connect the RF102S to the network.

•One or two asynchronous analog modems or ISDN terminal adapters (also known as ISDN TA), or one of each .

•A networked computer with Windows 95/98/2000, Windows NT 3.5 or higher and TCP/IP protocol installed.

•Any Windows communication application for Dial-Out operation.

•TCP/IP installed and configured on each workstation accessing the Internet.

Software Installation

The software installation process involves installing the RouteFinder Utilities, including RouteFinder Setup Wizard, RouteFinder Manager, and RouteFinder Monitor. A description of each component follows. Refer to the User Guide for more information.

RouteFinder Setup Wizard

The RouteFinder Setup Wizard provides a step-by-step process to assist you in entering all the basic settings needed to configure your RF102S for general use. All settings that are entered in the Setup Wizard can be found in their respective menus in RouteFinder Manager.

RouteFinder Manager

RouteFinder Manager is the main program used to configure all settings for your RF102S.