RouteFinder Quick Start Guide
15.The Note dialog box displays indicating that you have completed the Setup Wizard.
Read the “IMPORTANT!” information contained in the dialog box. Click Run Monitor (recommended), or click Run Manager to configure the RF102S, or click Exit.
Testing your Connection
When you select Run Monitor, the RouteFinder Monitor program opens.
1.To test your current settings, select Test Connection. Select Connect Port 1 to test serial port 1. Select Connect Port 2 to test serial port 2. The monitor activity will appear in the display window. Refer to the RouteFinder Monitor chapter in the User Guide for additional information about the monitoring capabilities of the RF102S.
2.Before using the device, you must configure your workstations for TCP/IP. Refer to the LAN Client Settings chapter of the User Guide for configuration information.
22