Multi-Tech Systems RF102S Hardware Installation Safety Warnings, Unpacking your RouteFinder

Page 6

RouteFinder RF102S Quick Start Guide

Hardware Installation

Safety Warnings

1.Never install telephone wiring during a lightning storm.

2.Never install telephone jacks in a wet location unless the jack is specifically designed for wet locations.

3.This product is to be used with UL and cUL listed computers.

4.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

5.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.

7.Do not use the telephone to report a gas leak in the vicinity of the leak.

8.To reduce the risk of fire, use only No. 26 AWG or larger Telecommunications line cord.

Unpacking your RouteFinder

The RF102S shipping box contains the following items:

System CD

Tucows CD

Power Supply

The RouteFinder RF102S

This Quick Start Guide

If any of these items are missing or damaged, please contact Multi-Tech Systems.

6

Image 6
Contents Quick Start Guide Quick Start Guide Contents Introduction RouteFinder RF102SRelated Documentation Hardware Installation Safety Warnings Unpacking your RouteFinderCabling your RouteFinder Cabling the RouteFinder RF102SPage RouteFinder Setup Wizard Software Installation and ConfigurationSoftware Installation RouteFinder ManagerUsing RouteFinder Setup Wizard Click Install SoftwareRouteFinder Monitor Page Page Setup Wizard Device IP Address dialog box displays Page Remote Access Use Local Client ListPage Use Radius Server IP Routing NAT Enabled and IP Routing NAT Disabled Setup Wizard DNS IP Address dialog box displays Setup Wizard Modem Settings dialog box displaysPage Software Installation Testing your Connection Configuring your Route Finder Using Telnet to Configure your RouteFinderLimited Warranty Multi-Tech Warranty & Repair PoliciesTechnical Support S0000137