Software Installation

13.The Setup Wizard: Modem Setting dialog box re- displays. Select the baudrate from the Asynchronous port settings list. Select the DTE speed (the speed of communication between the asynchronous port of the RF102S and the modem). For DCE speed compression modems, this can normally be set to about four times the speed of your modem. If you set the baudrate too high, the dial-up connection may fail.

Note: You may need to set a lower baudrate since the modem’s maximum connection speed may not be attainable due to variations in phone line quality and ISP connection.

Click Next to complete the basic configuration.

14.The Check List dialog box displays, summarizing your configuration selections. Verify that all selections are correct. If you find an incorrect setting, click Back to return to the window containing the error and correct it. When finished, click Next to return to the Check List dialog box.

Click Finish to complete the configuration.