Multi-Tech Systems ISIHP-2S, ISIHP-2U quick start Introduction

Page 4

Introduction

Welcome to Multi-Tech’snew MultiModemISI Hybrid Series, model ISIHP-2S/2U, a multiport hybrid ISDN card that can be

plugged into any PCI slot for Remote Access Server (RAS) applications. Included on the ISIHP-2S/2U are four V.90/K56flex central site modems for incoming analog modem and fax calls, as well as two terminal adapters. Each terminal adapter appears as two ports to the server PC using the ISIHP-2S/2U. The terminal adapters identify incoming analog calls and route them to the central site modems. The ISIHP-2S/2U also supports dial-out applications via the modems or terminal adapters.

The card features eight RAS ports using two Basic Rate Interface (BRI) ISDN lines. The eight ports allow a server to accept any combination of analog modem and digital ISDN calls, giving the user the flexibility to customize the settings of the terminal adapters and modems. Since the two BRI lines constitute only four Bearer channels, only four of the eight ports can be active at any one time. The two terminal adapters handle the four B-channels as four independent data connections (see diagram below).

Com Ports

5

1

2

6

7

3

4

Modem

TA

Modem

Modem

TA

ISDN

RJ-45 jack

3456

Line 1

 

RJ-45 jack

3456

Line 2

 

8

Modem

4

MultiModemISI Hybrid Series, ISIHP-2S/2U

Image 4 Contents
Quick Start Guide MultiModemISI Hybrid SeriesModel ISIHP-2S/2U Contents Introduction Peripiheral Component Interconnect PCI DeviceIntroduction Shipping ContentsComputer Requirements Safety Warnings Hardware Installation ProcedureIsihp NT1 LED Indicators B2 LED IndicatorLine Installing the ISIHP-2S/2U in Windows NT 3.51/4.0 Software/Driver Installation Windows NT ISI Cards dialog box appears. Click Add Software/Driver Installation Windows NT After the last ISIHP/2S/2U card has been added, click Close Installing TAs and Modems to COM Ports in Windows NT To install terminal adaptersSoftware/Driver Installation Windows NT Software/Driver Installation Windows NT To install modems Software/Driver Installation Windows NT Software/Driver Installation Windows NT Software/Driver Installation Windows Icon Addresses and IRQ Codes Removing ISIHP-2S/2U Card and Driver in Windows NT 3.51/4.0 Software/Driver Installation Windows To Remove the ISIHP-2S/2U Card and Drivers in Windows Software/Driver Installation Windows Software/Driver Installation Windows Software/Driver Installation Windows Installing TAs & Modems to COM Ports in Windows 95 /98 Removing the DriverSoftware/Driver Installation Windows Software/Driver Installation Windows Software/Driver Installation Windows Software/Driver Installation Windows To install modems Windows 95/98 Software/Driver Installation After the modem installs to the port, click Finish Software/Driver Installation Removing the Driver Windows 95 only Configuring the Terminal AdapterNorth American Users Optional Settings International UsersS0= Isdn TA Configuration Utility Insert the Config Utility diskette into the floppy driveSoftware/Driver Installation Software/Driver Installation Software/Driver Installation Software/Driver Installation Software/Driver Installation ConfigMenu Configuration Utility AT Commands ConfigMenu MenusConfiguring Ports for NetWare Connect NetWare Connect Novell Driver InstallationRemoving the Driver Novell SCO Open Server 5 Driver Installation Examining media. Please wait …Enter Warranty and Service Information Activating Ports in SCO Open Server Record the setting you select for each port Removing the Driver SCO Open Server Linux Driver Installation To install the Linux driverMiscellaneous Cat /proc/interruptsLimited Warranty ServiceIndex SCO Open Server 5 58 removing driver Windows NT