Multi-Tech Systems ISIHP-2U, ISIHP-2S quick start Safety Warnings, Hardware Installation Procedure

Hardware Installation

Safety Warnings

•Never install telephone wiring during a lightning storm.

•Never install telephone jacks in wet locations unless the jacks are specifically designed for wet locations.

•Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

•Avoid using a telephone (other than cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.

•Do not use the telephone to report a gas leak in the vicinity of that leak.

•Ports that are connected to other apparatus are defined as SELV. To ensure conformity to EN 41003, ensure that these ports are connected only to the same type on the other apparatus.

Hardware Installation Procedure

1.Before handling the ISIHP-2S/2U, discharge any static in your body by touching a piece of grounded metal such as the computer chassis.

2.Carefully remove the ISIHP-2S/2U from its antistatic bag, handling it only by the mounting bracket and edges. Do not touch the gold- plated connectors along the bottom edge. (You may want to save packaging for possible future use.)

3.Visually inspect the ISIHP-2S/2U. The 2U model is distinct from the 2S model in that it includes auxiliary modules, as shown below. If you have any concerns about the condition of your ISIHP-2S/2U unit, call Technical Support at (612) 717-5863.

MultiModemISI Hybrid Series, ISIHP-2S/2U 7