Multi-Tech Systems ISIHP-2U, ISIHP-2S quick start NT1

Page 9

Hardware Installation

U Interface

S Interface

S/T Interface

 

 

 

 

 

 

 

 

 

NT1

Device

ISDN line enters building

ISIHP -2S

Note: The ISIHP-2S/2U communicates over ISDN lines. If you don’t have a standard modular jack near your computer, you should install one or have one installed by your telephone company. In the US, installation kits and adapters are available wherever telephones are sold.

Note: The ISIHP-2S requires an S/T-interface. The ISDN phone cord must be connected between the ISDN network connection and the NT1 device.

10.Turn on power to the computer. Now you are ready to install software.

MultiModemISI Hybrid Series, ISIHP-2S/2U

9

Image 9
Contents Quick Start Guide MultiModemISI Hybrid SeriesModel ISIHP-2S/2U Contents Introduction Device Peripiheral Component Interconnect PCIShipping Contents IntroductionComputer Requirements Hardware Installation Procedure Safety WarningsIsihp NT1 B2 LED Indicator LED IndicatorsLine Installing the ISIHP-2S/2U in Windows NT 3.51/4.0 Software/Driver Installation Windows NT ISI Cards dialog box appears. Click Add Software/Driver Installation Windows NT After the last ISIHP/2S/2U card has been added, click Close To install terminal adapters Installing TAs and Modems to COM Ports in Windows NTSoftware/Driver Installation Windows NT Software/Driver Installation Windows NT To install modems Software/Driver Installation Windows NT Software/Driver Installation Windows NT Software/Driver Installation Windows Icon Addresses and IRQ Codes Removing ISIHP-2S/2U Card and Driver in Windows NT 3.51/4.0 Software/Driver Installation Windows To Remove the ISIHP-2S/2U Card and Drivers in Windows Software/Driver Installation Windows Software/Driver Installation Windows Software/Driver Installation Windows Removing the Driver Installing TAs & Modems to COM Ports in Windows 95 /98Software/Driver Installation Windows Software/Driver Installation Windows Software/Driver Installation Windows Software/Driver Installation Windows To install modems Windows 95/98 Software/Driver Installation After the modem installs to the port, click Finish Software/Driver Installation Configuring the Terminal Adapter Removing the Driver Windows 95 onlyNorth American Users International Users Optional SettingsS0= Insert the Config Utility diskette into the floppy drive Isdn TA Configuration UtilitySoftware/Driver Installation Software/Driver Installation Software/Driver Installation Software/Driver Installation Software/Driver Installation ConfigMenu Configuration Utility ConfigMenu Menus AT CommandsNetWare Connect Novell Driver Installation Configuring Ports for NetWare ConnectRemoving the Driver Novell Examining media. Please wait … SCO Open Server 5 Driver InstallationEnter Warranty and Service Information Activating Ports in SCO Open Server Record the setting you select for each port Removing the Driver SCO Open Server To install the Linux driver Linux Driver InstallationCat /proc/interrupts MiscellaneousService Limited WarrantyIndex SCO Open Server 5 58 removing driver Windows NT