Chapter 3 – Using the Web Management Software
Networks & Services > Service Configuration
On this screen you can specify the standard set of well known services available on the system. These services enable the configuration of the
Service Configuration
Enter the Name, Protocol, Source Port/Client, and Destination Port/Server for the new Service.
•A Service Name cannot be edited.
•A Service cannot be deleted if it is used in another configuration.
•Service changes are reflected in all the configurations in the Web Management software where they are used.
•Services added here will be displayed in the following sections: DNAT, Packet Filters.
Name:Enter the name of the Service. It has to be unique.
Protocol: Enter the type of protocol (ITCP, UDP).
Source Port: Enter the Source Port for this service.
Destination Port: Enter the name of the Destination Port for the service.
Add Button: Click the Add button. The new service is added and will display on the screen.
36 |