Chapter 3 – Using the Web Management Software
Chapter 3 – Using the Web
Management Software
The Web Management software configures the Ethernet functionality of your MultiModem.
Navigating the Web Management Software
This section explains the menu structure and the navigation buttons of the router’s Web Management software.
Menu Bar
IP Setup: Sets up a General Configuration, HTTP, DDNS, SNTP, Static Routes, and Remote Configuration.
PPP:Sets up the PPP authentication,
Networks & Services: Defines networks and services to make them available to other functions such as allowed packet filters, DHCP Server, and Statistics & Logs.
Packet Filters: Defines filter rules, DNAT configuration, and ICMP rules.
GRE Tunnels: Generic Routing Encapsulation (GRE). Defines the remote network and the tunnel through which traffic is to be routed.
DHCP Server: Configures the DHCP server settings.
Tools: Sets DDNS Force Update and Reset Modem, displays Service Status, and provides screens for Firmware Upgrade, Load Configuration, and Save Configuration.
Statistics & Logs: Shows statistics and logs maintained by the modem.
Save & Restart: Saves your settings and reboots your PC.
Help Index: Accesses the online Help text.
IMPORTANT NOTE ABOUT SUBMIT AND SAVE & RESTART
Click the Submit button located at the bottom of most screens in order to save any changes you make.
Then you must click the Save & Restart button, located on the Menu bar, in order for your settings to take effect. Save & Restart does not have to be executed after each screen; you can change and Submit several screens, and then click Save & Restart.
20 |