Multi-Tech Systems MTCBA-G-U-F4 manual Installing the Modem Driver in Windows Server 2008, XP

Page 17

Chapter 2 – Activation and Installation

Installing the Modem Driver in Windows Server 2008, XP, 2003

This installation assumes a Windows Server 2008, XP or Windows 2003 operating system.

Installing the Serial Port

1.Connect the USB cable between the MultiModem and the PC.

2.Insert the MultiModem CD into your CD-ROM drive. The CD uses the Autorun feature, and after a brief delay, the MultiModem Setup – Welcome screen appears. Close the Welcome screen.

In some situations the operating system will display a Found New Hardware Wizard screen and asks you: Can Windows connect to Windows Update to search for software?

Select No, not this time. Then click Next.

2.The Found New Hardware Wizard screen now displays the GSM Device. This is the first of three New Hardware Wizards that will appear.

3.Click on Install from a list or specific location (Advanced), and then click Next..

Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide

17

Image 17

Contents MultiModem Gprs Trademarks and Logos Revision History Date DescriptionWorld Headquarters Technical Support Country By Email By PhoneContents Product Description FeaturesSafety Package Contents Electrical Specifications General SpecificationsRF Specifications Functions GSM/GPRS ModesInterfaces Antenna SpecificationsAT Command Reference Guides Phone Numbers for the Wireless Modem Activate Your Wireless AccountInsert the SIM Card into the Holder Connect the Antenna and USB CableThis is an optional step Attach the Modem to a Flat SurfacePreliminaries Install the Modem DriverIntroduction Activation and Installation Activation and Installation Installing driver software… screen appears Installation of the Modem Click Close. The installation of drivers is now complete Installing the Serial Port Installing the Modem Driver in Windows Server 2008, XPActivation and Installation Page Select No, not this time and then click Next Installing the Modem DriverPage Page Completing the Found New Hardware Wizard screen appears Click Continue AnywayExamples of Useful AT Commands Phone Number for the Wireless ModemChanging the Gprs Band Example AT+WMBS=4,0. Press EnterChecking Network Registration and Roaming Status Verifying Signal StrengthChecking the Modem’s Identity Establishing a Voice CallAnswering a Circuit-Switched Data CSD Connection Using Short Message Services SMSEstablishing a Circuit-Switched Data CSD Connection Read a Stored Message SMS ExamplesDelete a Stored Message Send an SMS message to another SMS compatible devicePage Requirements Internet AccessConnecting to the Gprs Network for Internet Access Create Your Dial-Up Connection in Windows Vista, XP, 2003, Disconnecting the ConnectionSolutions for ‘no connection through serial link’ situation Troubleshooting ExamplesSolutions for no carrier message Situation a The modem does not answerFrequently Asked Questions July How do I send an SMS message to an email account?

Related manuals

Manual 32 pages 23.62 Kb