MicroNet Technology SP624DB, SP616DB user manual Trunk

Page 10

Trunk

SP616DB:

Figure 13: Trunk of SP616DB

zDisable: Click and choose the Disable to disable the Trunk Group 1 or Trunk Group 2.

zTrunk Group 1: Click and choose the Port 1, 2 to be added into the Trunk Group 1.

zTrunk Group 2: Click and choose the Port 9, 10 to be added into the Trunk Group 2.

zApply: Click the Apply button and apply the new settings of the Trunk Groups.

SP624D:

Figure 14: Trunk of SP624DB

zTrunk Group 1: Click and choose any four ports to be added into the Trunk Group 1.

zTrunk Group 2: Click and choose any four ports to be added into the Trunk Group 2.

zApply: Click the Apply button and apply the new settings of the Trunk Groups.

Note: each Trunk Group can not be selected more than four ports, the alarm message will show “Non-Identify Trunk Group“, if it’s exceeded.

10

Image 10

Contents EtherFast 10/100M Smart Switch Features Package ContentsPhysical Description Port Status IP Reset Push ButtonTX/FX Push Button LEDsInstalling the Module optional InstallationSettling the Switch Preparing the SiteConnecting to Power Connecting to NetworkSetting UP Console Port Connection Switch ConfigurationMain Menu Main menu System ChangeIP Configuration PortVlan Trunk Load Default Save ConfigurationClick Save Configuration Click Load DefaultSpecifications