MicroNet Technology SP616DB, SP624DB user manual Vlan

Page 9

VLAN

Figure 12: VLAN

zVLAN: Click and choose the ports to be added into the VLAN groups.

zApply: Click the Apply button and apply the new settings of the VLAN groups.

Note: all Ports have to be selected to one of the VLAN Groups, those Port/Ports were not selected will be notified by the alarm message which shows “Non-Identify VLAN Group “.

9

Image 9
Contents EtherFast 10/100M Smart Switch Package Contents FeaturesPhysical Description TX/FX Push Button IP Reset Push ButtonPort Status LEDsSettling the Switch InstallationInstalling the Module optional Preparing the SiteConnecting to Network Connecting to PowerSwitch Configuration Setting UP Console Port ConnectionMain Menu System Change Main menuPort IP ConfigurationVlan Trunk Click Save Configuration Save ConfigurationLoad Default Click Load DefaultSpecifications