MicroNet Technology SP616DB, SP624DB user manual Main menu, System Change

Page 7

Figure 8: Main menu

System Change

The System Change parameters can be displayed by clicking the System Change button in the left sub-menu.

Figure 9: System Change

zSwitch Name: Type a switch name and replace the current switch name with a new one.

(Please restart your Computer once the Switch Name is replaced and saved under “Save Configuration “by the new name ).

Note: only “a-z “, “A-Z”, “0-9”, “under line” & “Space” can be acceptable, totally can not exceed 16 characters.

zPassword: Enter a user-defined password and change the factory default password.

Note: only “a-z “, “A-Z”, “0-9”, “under line” & “Space” can be acceptable, totally can not exceed 16 characters.

zApply: Click the Apply button and apply the new System settings.

7

Image 7
Contents EtherFast 10/100M Smart Switch Features Package ContentsPhysical Description LEDs IP Reset Push ButtonTX/FX Push Button Port StatusPreparing the Site InstallationSettling the Switch Installing the Module optionalConnecting to Network Connecting to PowerSetting UP Console Port Connection Switch ConfigurationMain Menu System Change Main menuPort IP ConfigurationVlan Trunk Click Load Default Save ConfigurationClick Save Configuration Load DefaultSpecifications