| Parameter |
| Description |
|
|
|
|
| Profile Name |
| User can give this profile a name. Every profile needs a |
|
| unique name. | |
|
|
| |
|
|
| Please input the SSID of this access point. If user selected an |
| SSID |
| access point from the list, and SSID is not hidden, it will be |
|
| filled automatically. However, user can modify the SSID if | |
|
|
| |
|
|
| necessary. |
|
|
| Please select the network type: Ad hoc or Infrastructure. If |
|
|
| user is connecting to an access point, please select |
| Network Type |
| ‘Infrastructure’. For |
|
| connecting to another computer using Ad Hoc mode), please | |
|
|
| |
|
|
| select Ad hoc. If user selected an access point from the list |
|
|
| above, please keep this field unchanged. |
|
|
| User can select the wireless output power here. If user is not |
| Tx Power |
| too far from access point (good signal reception), it can select |
|
| a lower output power to save energy. For a distant access | |
|
|
| point, user can select a higher output power. It’s suggested to |
|
|
| select ‘Auto’ to let setup utility decide the best output power. |
| Preamble |
| Select the preamble for Ad hoc mode here. Available options |
|
| are ‘Auto’ and ‘Long’. It’s suggested to select ‘Auto’ to let | |
|
|
| setup utility decide the preamble. |
| Channel |
| User can select the radio channel number for AdHoc mode. |
|
|
| Please select CAM (constantly awake mode, keep wireless |
|
|
| radio activity even when not transferring data), or PSM |
| Power Save Mode |
| (Power saving mode, switches radio off when not transferring |
|
| data). It’s recommended to choose ‘PSM’ if user is using this | |
|
|
| |
|
|
| network card with notebook computer to help the battery last |
|
|
| longer. |
|
|
| Check this box to set the RTS threshold. User can drag the |
| RTS Threshold |
| slider to set the threshold value, or input the value in the box |
|
| located at right. It’s recommended to keep this value | |
|
|
| untouched unless the users know the effect of changing this |
|
|
| value. |
|
|
| Check this box to set the packet fragment threshold. User can |
| Fragment Threshold |
| drag the slider to set the threshold value, or input the value in |
|
| the box located at right. It’s recommended to keep this value | |
|
|
| untouched unless users know the effect of changing this |
|
|
| value. |
15