MicroNet Technology SP907NL user manual EAP Method, Tunnel Authentication, ID \ Password Tab

Parameter	Description
EAP Method	Select ‘802.1x EAP method’ from dropdown menu. Please
	ask the administrator of the access point for the correct EAP
	method.
	Select 802.1x tunnel authentication type from dropdown
	menu. Please ask the administrator of the access point for
	correct tunnel authentication method. This pull down menu is
	only available when authentication type is 'PEAP', ‘TLS /
Tunnel Authentication	Smart Card', or 'TTLS'.
	When users use 'EAP-FAST' as authentication type, the
	protocol setting is always 'Generic Token Card' and cannot be
	changed. Users also need to select ‘Soft Token’ or ‘Static
	Password’ as password in ‘ID \ Password’ setting.
ID \ Password Tab	Input 802.1x username/password and other information if it is
	required. Click ‘Show Password’ to show the password typed.
Client Certification	Use this tab to select a local certificate from dropdown menu.
	If the access point requires a specific client certificate, the
Tab
	certificate must be installed on the client computer.
	Use this tab to use server-based certification. Please select a
	CA (Certificate Authority) from dropdown menu. If
	intermediate certificates are allowed, please select ‘Allow
Server Certification	intermediate certificates’. Also, if users need to specify CA
	server’s name, they can specify it in ‘Server name’ field. User
Tab	can select ‘Server name must match’ so the CA server’s
	name must be the same with the value set in ‘Server name’
	field. If only the domain name part of full server name needs
	to be the same value set in ‘Server name’ field, select
	‘Domain name must end in specified name’.

After you complete all information related to the access point, click ‘OK’ to save the profile, or click ‘cancel’ to stop the process.

17