MicroNet Technology SP907NL user manual WPS Configuration, WPS Setup PBC Push-Button Configuration

3.2.9 WPS Configuration

Wi-Fi Protected Setup (WPS) is the latest wireless network technology, which makes wireless network setup become very simple. The user doesn’t have to configure the wireless access point and setup data encryption when devices support WPS.

This wireless network card is compatible with WPS. To use this function, the wireless access point must also support WPS function. Please follow the following instructions to establish secure connection between WPS-enabled devices.

WPS Setup - PBC (Push-Button Configuration)

Step 1. Set ‘Config Mode’ to ‘Enrollee’, and then push the ‘WPS’ button on the wireless access point (the button used to activate WPS standby mode may have another name), or use other way to start WPS PBC standby mode as the instruction given by the wireless access point’s user manual. User can also set ‘Config Mode’ to ‘Registrar’. In this mode, the wireless network card will wait for other WPS-enabled access points to send WPS pairing requests. Please refer to the instruction given by the wireless access point’s user manual to understand how to send WPS requests.

Step 2. Before users start to establish the wireless connection by using WPS, click ‘Rescan’ button to search for WPS-enabled access points and make sure the WPS function of the access point is activated.

28