MicroNet Technology SP907NL Authentication, Encryption, WPA Preshared Key, Show Password, Use

Parameter	Description
	Select the authentication type of the wireless access point or
Authentication	wireless device in this field. When users are adding a profile
	from an existing access point or wireless device,
	authentication type will be selected automatically.
	Select the encryption type of the wireless access point or
Encryption	wireless device in this field. When users are adding a profile
	from an existing access point or wireless device, the
	encryption type will be selected automatically.
	User can select key type (Hexadecimal or ASCII) and input
	WEP key in this field. If encryption is not enabled, or users
	select ‘WPA’ as encryption type, this field will be disabled and
	grayed out.
	User can set up to 4 WEP keys here. There are two types of
WPA Preshared Key	WEP: Hexadecimal and ASCII. For Hexadecimal key, user
	can input number 0-9 and alphabet a-f (Eg. 001122aabbcc).
	For ASCII key, user can input number 0-9 and alphabet a-z
	(Eg. mywepkey12345).
	The length of WEP key depends on the type of WEP key
	selected. User can input 10 or 26 hexadecimal characters and
	5 or 13 ASCII characters as WEP key.
Show Password	Check this box and all passphrases or security keys inputted
	will be displayed instead of replacing it with asterisk.
Use 802.1x	If the access point requires 802.1x authentication, please click
	on ‘Use 802.1x’ box, then click ’802.1X’ tab to set parameters.

To set 802.1x authentication for the access point, please click ‘802.1X’ tab:

16