3-Administering the MaxNAS R8
with Thecus modules, and you may wish to create your own or add other user created modules as well; There is a Thecus community with many various modules available at their website http://onbeat.dk/thecus. Please note that Micronet offers no support or endorsement for any content on this site.
All installed modules will be listed in one of the two sections of the Module Menu. To access the module management, navigate to “System”
• To install a new module, click 
next to the module file entry box. Navigate and select the
module file. Click Install to begin the upload, and confirm the operation in the following confirmation dialog.
•To enable, disable, or uninstall a module, click the respective function to the module in the action column- 
to enable, 
to disable, and 
to remove the module completely.
•Modules that install a user interface will be accessible by navigating to their respective menu item that will appear in “System”
8. Backup and Synchronization Services
The Backup menu contains all of the status updates and configuration options for the nSync and rSync services. To access the backup feature controls, navigate to “System”
The nSync menu lists all of the nSync or rSync jobs that have been created. The table on this page displays the name of the synchronization task, the destination server, the share folder being backed up, the last time the synchronization was performed, whether or not the task was completed successfully, if the task has a schedule assigned and the current status of the backup job. You can also set a universal
bandwidth limit on all tasks using the “Bandwidth Setting”
MaxNAS Owner’s Manual | 42 |