1-Getting Started
3. Safety Warnings
For your safety, please read and follow the following safety warnings:
•Read this manual thoroughly before attempting to set up your MaxNAS R8.
•DO NOT attempt to repair your MaxNAS R8 under any circumstances. In the case of malfunction, turn off the power immediately and have it repaired at a qualified service center. Contact Micronet Technical Support for details.
•DO NOT allow anything to rest on the power cord and DO NOT place the power cord in an area where it can be stepped on. Carefully place connecting cables to avoid stepping or tripping on them.
•Your MaxNAS R8 can operate normally under temperatures between 0°C and 40°C, with relative humidity of 20% – 85%. Using the MaxNAS R8 under extreme environmental conditions could damage the unit.
•Ensure that the MaxNAS R8 is provided with the correct supply voltage (AC 100V ~ 240V, 50/60 Hz, 3A). Plugging the MaxNAS R8 to an incorrect power source could damage the unit.
•Do NOT expose the MaxNAS R8 to dampness, dust, or corrosive liquids.
•Do NOT place the MaxNAS R8 on any uneven surfaces.
•DO NOT place the MaxNAS R8 in direct sunlight or expose it to other heat sources.
•DO NOT use chemicals or aerosols to clean the MaxNAS R8. Unplug the power cord and all connected cables before cleaning.
•DO NOT place any objects on the MaxNAS R8 or obstruct its ventilation slots to avoid overheating the unit.
•Keep packaging out of the reach of children.
•If disposing of the device, please follow your local regulations for the safe disposal of electronic products to protect the environment.
4. What’s Included
Your MaxNAS R8 comes with the following items:
1 MaxNAS R8 unit
8 Disk Drive Modules
1 Set of drive locking keys
1 MaxNAS R8 Product CD
1 Quick Install Guide
2 power cord
2 Cat5e Gigabit Ethernet cable
2 Racking Rails
MaxNAS Owner’s Manual | 8 |