OPERATING GUIDE.
Telnet port
Port number at which Smart 16 IP's Telnet server is listening. If empty the default value is used.
Bandwidth limitation
The maximum network traffic generated through the Smart 16 IP Ethernet device.
Disable Setup Protocol
Exclude the Smart 16 IP from the setup protocol.
30.Dynamic DNS
Use the free Dynamic DNS service at www.dyndns.org. See Figure 24.
Administrator PC
Internet
DSL
Dynamic IP
NAT
DSL router
LAN
Dynamic DNS server
www.dyndns.com
Smart IP
Server
Figure 24 Dynamic DNS scenario
Smart 16 IP is reachable via the IP address of the DSL router, which is dynamically assigned by the provider. Since the administrator doesn't know the IP address assigned by the provider, Smart 16 IP connects to a special dynamic DNS server in regular intervals and registers its IP address there. The administrator can contact this server as well and pick up the same IP address belonging to his card.
The administrator has to register a Smart 16 IP that is supposed to take part in the service with the Dynamic DNS Server. He will get an approved nickname and password in return to the registration process. This account information is needed in order to determine the IP address of the registered Smart 16 IP.
To enable the Dynamic DNS:
1. Ensure the Smart 16 IP LAN interface is properly configured.
36