Minicom Advanced Systems 5UM20114 manual Security Settings, Serial Port 2 external power option

SMART CAT5 SWITCH 16 IP.

Figure 29 Serial Port 2 external power option

IPM 220-L(Inline Power Module) - External module option to switch power of a single system by putting it in the power supply line of the controlled system.

SPC 800/1600 - Using the AvocentTM SPC, switch power for more than one system connected to Smart 16 IP through a KVM switch. To use this device enter a username and password, which exist on the SPC and have the privileges to switch power for each port.

ePowerSwitch 4 port - Using this switch, switch power for more than one system connected to Smart 16 IP through a KVM switch.

ePowerSwitch-Slave – This also refers to the Minicom DX Power Switch S 8 port. Both switches are cascadable to up to 4 power switches with 8 ports. Smart 16 IP must be connected to the first switch of the cascade via a serial connection.

Smart Start Jr. – Check the box if this option is connected. Add Slave units if required.

32.Security Settings

From the Smart 16 IP Menu choose Security Settings. The Security Settings appears. See Figure 30.

41