APPLYING POWER (702M12-W)
The M12 A coded power connector is keyed, where the mating connection from the power supply can be made only when the male and female ends are lined up properly.
Verify the Power LED stays ON (GREEN).
Notes:
Only 1 power supply must be connected to power for minimal operation. For redundant power operation, V1 and V2 inputs must be connected to separate DC Voltage sources. This device will draw current from both sources simultaneously. Use
The LAN port supports Power over Ethernet and can be used redundantly with the power input mentioned above.
Recommended 24V DC Power Supplies, similar to:
Input AC 115/230V | Power 72W |
Output DC | 35 mm |
Output Current 1.3A @ 24V | Dimensions: 45X75X91 mm |
1.0A @ 28V |
|
Revision 04062009 | Page 13 of 52 |