N-Tron 702M12-W user manual Ingress Protection IP67

Page 7

INGRESS PROTECTION IP67

The classification of degrees of protection provided by the enclosures is defined by IEC 60529. Each rating is defined by specific tests.

The IP number is comprised of two numbers, the first referring to the protection against solid objects and the second against fluids. The higher the number, the better the device is protected against contact with moving parts and the harmful entry of various forms of moisture.

1st IP

Protection against ingress of solids

2nd IP

Protection against ingress of liquids

0

No protection

0

No protection

1

Protected against solid objects over 50mm e.g. hands,

1

Protected against vertically falling drops of water.

 

large tools.

 

 

2

Protected against solid objects over 12mm e.g. hands,

2

Protected against direct sprays of water up to 15°

 

large tools.

 

from vertical.

3

Protected against solid objects over 2.5mm e.g. wire,

3

Protected against direct sprays of water up to 60°

 

small tools.

 

from vertical.

4

Protected against solid objects over 1.0mm e.g. wires.

4

Protected against water sprayed from any direction.

 

 

 

Limited ingress permitted.

5

Limited protection against dust ingress (no harmful

5

Protected against low pressure water jets from any

 

deposit)

 

direction. Limited ingress permitted.

6

Totally protected against dust ingress.

6

Protected against high pressure water jets from any

 

 

 

direction. Limited ingress permitted.

 

 

7

Protected against temporary immersion between

 

 

 

15cm to 1m.

 

 

8

Protected against long periods of immersion under

 

 

 

pressure.

The 702M12-W Industrial Wireless Device is fully protected against dust and will remain sealed when immersed in water to a depth of 1 meter for 1 hour when all the ports are properly mated or sealed.

This IP67 cap seals off the LAN ports if unused to protect them from dirt, water, oil or any other contaminants which might be present in close proximity of the device.

This IP67 cap seals off the Antenna ports if unused to protect them from dirt, water, oil or any other contaminants which might be present in close proximity of the device.

This IP67 cap seals off the Power port if unused to protect it from dirt, water, oil or any other contaminants which might be present in close proximity of the device.

Revision 04062009

Page 7 of 52

Image 7
Contents Revision Revision Product Features Wireless Compliance Revision Contact Information Safety WarningsGeneral Safety Warnings Environmental Safety Electrical SafetyCleaning InstallationUnpacking Ingress Protection IP67 DIN-Rail Mounting DIN Rail MountingUniversal Rack Mounting 702M12-W Bulkhead Mounting 702M12-W Pole KIT Mounting PWR Front PanelLED LNK/ACTApplying Power 702-W Side View Applying Power 702M12-W RJ45 Connector Crimp Specifications Connecting the UnitTron Switch Grounding Techniques Industry Canada TroubleshootingSupport FCC StatementWeb Management and Configuration Navigation Configuration GuideSystem Info System Information Revision Statistics Reporting Extra Info Revision Tools Site Survey can be updated using the Scan button Station WDS mode enables packet forwarding at layer 2 level Basic Wireless SettingsRevision 802.11NG 20MHz 802.11NG 40MHz 802.11NA 20MHz 802.11NA 40MHz Wireless Security Revision Network Bridge ModeRevision Mulitcast Routing Settings Router ModeAdvanced Advanced Wireless SettingsAntenna Alignment LED Thresholds Acknowledgment TimeoutWireless Traffic Shaping Ping WatchDog ServiceSnmp Agent NTP Client, Web Server, Telnet Server Host Name FirmwareInterface Language Administrative AccountConfiguration Management Device MaintenanceScenario 1 Basic Bridge Common Topology ScenariosScenario 2 Encrypted Bridge LAN Scenario 3 Controls NetworkAP1 AP2 Scenario 4 WDS PeeringLAN Scenario 5 Broadband Modem Wireless Router W/ DhcpKey Specifications Regulatory Approvals 702M12-W Key Specifications Regulatory Approvals Tron Limited Warranty