TraceRoute: Allows tracing the hops from the
Resolution of the IP addresses (symbolically rather than numerically) can be enabled by selecting the Resolve IP address option.
The test is started using the Start button.
Site Survey: utility will search for wireless networks in range on all supported channels while the device is operating as an Access Point or a Station. In Station mode the channel list can be modified. Refer to the section Link Setup for the details on channel list customization.
Site Survey will report MAC Address, SSID, Encryption type (if any), Signal Strength, Frequency and the wireless channel used for each Access Point found.
The Site Survey can be updated using the Scan button.
Revision 04062009 | Page 26 of 52 |