Maretron Installation, 1.3 SIM100 Accessories, Quick Install, Unpacking the Box, Page

SIM100 User's Manual

1.3 SIM100 Accessories

Maretron offers the following accessories for the SIM100:

• SH-499CSTE Smoke/Heat Detector

•CO1000-S-W Carbon Monoxide (CO) Detector (Surface Mount White)

•LP1000-S-W Liquid Petroleum (LP) Detector (Surface Mount White)

•	BHW100	Bilge High Water Detector
•	MD-6157-N	Motion Detector
•	MS-1035	Magnetic Switch Rectangular (Indoor)
•	MS-1085-N	Magnetic Switch Rectangular (Outdoor)
•	MS-1055-N	Magnetic Switch Cylinder (Indoor/Outdoor)
•	MS-1075	Magnetic Switch Recessed (Indoor/Outdoor)

1.4 Quick Install

Installing the Maretron SIM100 involves the following five steps. Please refer to the individual sections for additional details.

1.Unpack the box (Section 2.1)

2.Choose a mounting location (Section 2.2)

3.Mount the SIM100 (Section 2.3)

4.Connect the SIM100 (Section 0)

5.Configure the SIM100 (Section 2.5)

2 Installation

2.1 Unpacking the Box

When unpacking the box containing the Maretron SIM100, you should find the following items:

1 – SIM100 – Switch Indicator Module

1 – Parts Bag containing 4 Stainless Steel Mounting Screws 1 – SIM100 User’s Manual

1 – Warranty Registration Card

If any of these items are missing or damaged, please contact Maretron.

2.2 Choosing a Mounting Location

Please consider the following when choosing a mounting location.

1.The SIM100 is waterproof, so it can be mounted in a damp or dry location.

2.The orientation is not important, so the SIM100 can be mounted on a horizontal deck, vertical bulkhead, or upside down if desired.

3.The SIM100 is temperature-rated to 55°C (130°F), so it should be mounted away from engines or engine rooms where the operating temperature exceeds the specified limit.

Page 2 Revision 1.0