Lightwave Communications SCS3230 manual Device Card, Sun

Page 29

A Lantronix Company

SCS3230 System Administrator's Guide

5.4Device Card

NOTE: DEVICE Cards MUST be updated to Version 4.03 (or higher) firmware for SCS3230

The SCS3230 is designed so that the default device port communications settings will match the communications settings of most Sun® server and workstation console ports (9600 baud, 8 data bits, no parity, one stop bit). Other equipment types (i.e., Cisco®) frequently use similar communications settings; check the manuals included with the equipment for the correct settings. The table below lists the default serial port communications settings for the SCS3230. Sections 6.3 and 6.4 outline the commands for changing the terminal and device port communications settings.

The following tables list the adapter part number and port configuration for some common equipment types that may be connected to the SCS3230. Note that in some cases, an additional cable or adapter is included with the equipment to convert a proprietary pinout to an EIA-standard pinout. Also, note that it is not possible to connect the RJ45 serial port of the ConsoleServer directly to the RJ45 serial port of any third-party equipment. Sun Netra servers, Cisco switches, and other similar devices require a special adapter or cable to connect to the ConsoleServer. The adapter or cable is usually provided by the manufacturer of the equipment (e.g., Sun), or may need to be created by the user. The adapters and cables from the equipment manufacturer are usually designed to interface directly to a terminal, so the ConsoleServer device port must be configured as DTE rather than its default value of DCE. Lightwave Communications has pre-made adapters and kits for some common equipment types; contact Lightwave for information regarding your specific application.

Note: Some adapters are also available in quantity packs, and may be shipped under a different part number. Quantity packs are "299.xxxx" compared to "200.xxxx".

Device Card typical adapters and 3200 port configuration:

 

System Type

Adapter Part Number

Port Configuration

 

 

SUN

200.0066

DCE

 

 

HP, SGI, PC (9pin)

200.0070

DCE

 

 

PC (25pin)

200.0067

DCE

 

 

Sun Netra t1/Cisco

200.0225

DCE

 

 

 

 

 

 

 

 

RJ45 to RJ45 Cables:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part Number

Length

 

 

200.0062

 

2m

 

 

200.0063

 

5m

 

 

200.0064

 

10m

 

 

200.0065

 

15m

 

 

15.00.038

- 29 -

May 2002

Image 29
Contents SCS3230 Lightwave Communications, Inc. LCI, a Lantronix Company Copyright & TrademarkDate Rev Comments Disclaimer & RevisionsManufacturer’s Name & Address Declaration of ConformityProduct Description SCS3230 Setup Script and System Administration User Access and Interface For Your Notes Quick Start Product DescriptionSystem Features Upgrade DescriptionHardware Features Flash 3230 Network/Control CardLantronix Company 1 10/100 Port Network Term Port Console Backup and Restore CommandsConnect Up to Thirty-two RS-232C Compatible Ports System Overview128K Fifo Audit Trail ConnectionsInterface Security Passwords2 3200 Switch Cards Power Supply ModuleSystem Components 3200 ChassisNetwork / Control Card Access CardsDevice Cards 4 3200 Network Cards Channel Extender CardsTerminal Cards Modem Card 5 3200 10/100 Network CardsItems in a SCS3230 Kit Installation InstructionsMove Database from your CS3200 to SCS3230 Backup Procedure of your CS3200 SystemRestore Procedure To Restore from a 3200 to a LCI Update To Update a Card or CardsConnecting to the Term Port Terminal Card Connecting Equipment to the SCS3230Term DCEModem Card Network / Control CardSUN Device CardConsoleServer 3200 System ConsoleServer 3200 Adapter Quick Checklist General layout showing Device port numbering SCS3230 Setup Script and System Administration Power-up Sequence Basic Use of the Administrator Functions Logging In, Network Connection Logging In, Serial ConnectionLogging Out Help Screen System Help Command ListSave AbbreviationsSys Admin vs. root access Setup Script Hostname and IP Address ConsoleServer 3200 System Lantronix Company Timezone Clock Lantronix Company Configure DNS Lantronix Company Hosts Services Syslog SSH Logins Telnet logins NTP Daemon Configure the Firewall ConsoleServer 3200 System Ping Attempts Firewall Reject MethodConsoleServer 3200 System Confirm Changes Save Command Adding a User ID Creating and Managing UsersDevice Device Device Device Device Device Device Device Listing User IDs Editing a User IDConsoleServer 3200 System Listusers Deleting a User IDStop Bits Terminals Command Modem Command Connections Command Status CommandsVersion Command Listcards CommandInfo Command LOG Command Powerstatus CommandSys Admin Session Management Commands Breaking User Connections Linesperpage CommandForcelogout Command Break CommandTelnettimeout Command Network Card User Access and InterfaceBye Command Logged OUT Help Overview of CommandsMonitor A.K.A. Device Mode Help F2 PULL-DOWN Menu Showing Initial Menu Choices Logging In and Changing PasswordsConnection Info Screen Logging OutChecking Connections F2 PULL-DOWN Menu to Select a Device PORT, Part Selecting a Device PortF2 PULL-DOWN Menu to Listen to a Device Port Part Listening to a Server SessionF2 PULL-DOWN Menu to Listen to a Device Port Part Direct Mode Escape Sequence Direct ModeF2 PULL-DOWN Menu for Device A.K.A. Monitor Mode Using the BufferGoto END of Buffer Goto Beginning of BufferDisplay Next Display PreviousLantronix Company F2 PULL-DOWN Menu to Change Break Sequence Break Generation SequenceF2 PULL-DOWN Menu to Display System Info Displaying System InformationFront Panel Display Information Lantronix Company ConsoleServer 3200 System Panel 10 press down Panel 11 press down Appendix a Command Abbreviations Connections Appendix B Hexadecimal Ascii Code Equivalent