A Lantronix Company | SCS3230 System Administrator's Guide |
7:Creating and Managing Users
7.1Adding a User ID
The ADDUSER command creates user IDs and assigns initial privileges. The following screen will be displayed when the command is used:
sys admin>>ADDUSER
Number of available user records: 200
Number of users defined: 0 Enter user id USER ID >
Press <ENTER> after typing the user ID. The user name is not
Enter case sensitive password PASSWORD > ****
This parameter limits the number of simultaneous logins a user may have. The sys admin may select between 0 and 17 concurrent logins. A user with 0 logins will have connect and listen permissions defined, but cannot login to access anything until a number of logins greater than 0 is defined.
Allowed devices example:
Allowed listen devices example:
The sys admin is now prompted to define the device ports that the user will be allowed to access for direct connections and listening connections. If more than one port is to be allowed, then the individual ports must be separated by a comma. A range of ports may be specified using the dash
15.00.038 | - 59 - | May 2002 |