Speaker Orientation, Speaker Location

Speaker Orientation

For the best sonic results, DSM1 speakers should be set in a vertical orientation. Vertical place- ment minimizes the effects of interference be- tween the drivers and provides the largest hori- zontal (side-to-side) listening window as well as the most stable and consistent frequency re- sponse and imaging.

DSM1 vertical orientation (stereo)

Speaker Location

Make sure speakers are placed symmetrically in relation to the listening position by doing the following:

Place speakers so that the HF drivers are ap-

proximately the same height as your ears in the

mixing position.

Place speaker pairs the same distance from the

Stereo Positioning

The following diagram shows the recommended setup for stereo monitoring.

0.5m/20"

Stereo placement

Surround Positioning

The following diagram shows the recommended setup for use in a 5.0 surround environment (a subwoofer is not shown in this diagram).

	CENTER
FRONT LEFT	FRONT RIGHT

two sides of the room.

Place speakers so that the backs of the speak-

ers are a minimum of 6 inches (15 cm) from the

wall to prevent obstruction of air flow in the

bass ports.

25o30o

25o

REAR LEFT

Surround placement

30o

100o

135o

WITHIN

THIS

WINDOW

REAR RIGHT

8M-Audio Studiophile DSM1 Guide