To adjust the Desktop 220 Hz Filter:
Set switches 9 and 10 to the positions shown below to activate the corresponding EQ levels.
To adjust the Desktop 200 Hz Filter:
Set switches 9, 10 11 and 12 to the positions shown below to activate the corresponding EQ levels.
9 |
10 |
OFF |
OFF |
ON |
OFF |
OFF |
ON |
ON |
ON |
0 dB
9 |
10 |
11 |
12 |
OFF |
OFF |
OFF |
OFF |
ON |
OFF |
ON |
OFF |
OFF |
0 dB
Desktop 220 Hz Filter switches and settings
To adjust the Desktop 175 Hz Filter:
Set switches 11 and 12 to the positions shown below to activate the corresponding EQ levels.
ON |
OFF |
ON |
ON |
ON |
ON |
11 |
12 |
OFF |
OFF |
ON |
OFF |
OFF |
ON |
ON |
ON |
0 dB
ON |
Desktop 200 Hz Filter switches and settings
Tips for Best Performance
DSM1 speakers are built and tested to exacting standards with features to protect the units from failure under normal usage. Keep in mind the following:
Desktop 175 Hz Filter switches and settings
Overdriving the units for prolonged periods or not observing the warnings set out in this guide may result in failure.
If distortion occurs, reduce the input level im- mediately.
Both the HF and LF drivers are delicate and should not be touched. A damaged driver will adversely affect the performance of the speaker.
As a precaution, always turn off the units be- fore plugging or unplugging signal connections or switching source equipment.
Chapter 3: Setup and Operation 15