Fig. A Fig. B | Metra Electronics 99-7407 instruction

Fig. A

Fig. B

IF AN EQUALIZER WILL BE INCLUDED: Slide the aftermarket equalizer into the back of the Radio Housing. Using the hardware included with the equalizer, mount the unit to the kit.

(see Fig. A)

IF AN EQUALIZER WILL NOT BE INCLUDED: Snap the Equalizer Dummy Plate into the Radio Housing. (see Fig. B)

KIT FEATURES

Shaft and DIN unit provisions

Equalizer provisions

KIT COMPONENTS

Radio Housing

Faceplate #1

99-7407

INSTALLATION

INSTRUCTIONS

APPLICATIONS
CAR	PAGE
NISSAN
240SX 1989-94	1
Maxima 1989-94	1
Stanza 1987-89	2

A)Strip wire ends back ½"

B)Twist ends together

C)Solder

D)Tape

Locate the factory wiring harness in the dash. Metra recommends using the proper mating adaptor and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit).

Re-connect the battery terminal and test the unit for proper operation. Mount the head unit/kit assembly to the sub-dash with (4) screws previously removed in step #1.

Faceplate #2

Equalizer

Dummy Plate

TOOLS REQUIRED

Phillips screwdriver

Cutting tool

1-800-221-0932 www.metraonline.com

3	rev. 100103

Wrench