Macsense Connectivity XRouter Pro For a Static or Dynamic IP Address without PPPoE See FIgure

Chapter 4 - ADVANCED CONFIGURATION

Statistics: This allows you to view the general traffic on the route, and to display the IP address as well as the number of packets translated for each client.

For a Static or Dynamic IP Address without PPPoE: (See FIgure 4.5-2)

Figure 4.5-2

DHCP Release: This allows you to release the IP address given by your ISP.

DHCP Renew: This allows you to get a new IP address from your ISP.

DHCP Clients Table: This allows you to view DHCP clients on the LAN side of the router.

Statistics: This allows you to view general traffic on the router, display the IP address and the number of packets being translated.

Note: The screens shown above for the Status Monitor do not show actuall connection. Dduring an actual connection, IP address information will be

listed.

24