Firmware Upgrade | Macsense Connectivity XRouter Pro instruction

Chapter 4 - ADVANCED CONFIGURATION

4.11 Firmware Upgrade

Xsense is continually improving the firmware (software programmed on a PROM) in each of its products. The XRouter Pro is shipped with the most up-to-date software available at the time of production. If a firmware upgrade becomes available, it will be posted in the Service and Support section on our Web site. To upgrade the XRouter Pro, you will need the TFTP client and the firmware file named “xxxxx.bin.” These two files can be found on our Web site at www.macsense.com. The following is the upgrade procedure. (See Figure 4.11-1)

Figrue 4.11-1

1.Download these two files from our Web site: TFTP client, and “xxxxx.bin”

NOTE: These files are actually inside a single compressed folder on our web site. This means that you would only download one file. Once downloaded and decompressed, a folder will contain the needed files.

2.Double click the Xsense Router Series Updater icon to run the pro- gram. Enter both the IP address of the XRouter pro into the IP Field and your password in the Password Field..

3.Click File Name field. A window appears. Select a location of the firmware file “xxxx.bin”

4.Click Update button to begin the upgrading process. After the upgrade is complete, reset the XRouter Pro by unplugging the device and plugging it back in.