Macsense Connectivity XRouter Pro user manual Assigning TCP/IP Values Manually

Chapter 3 - EASY INSTALLATION

3.3.1 Assigning TCP/IP Values Manually

If you already have a DHCP server on the network, or if you prefer not to use the XRouter Pro’s DHCP server to assign TCP/IP values automatical- ly, you can input these values manually.

To manage computer’s address manually, perform the following functions: (See Figure 3.3-4)

1.Click the IP Address tab from the TCP/IP properties window.

2.In the IP Address field enter “192.168.1.x” where x is any variable of your choice ranging from 2 - 252. Enter “255.255.255.0” in the Subnet Mask field.

NOTE: No two computers on the LAN is allowed to adopt the same IP address or an IP address conflict will occur.

3.Click the DNS tab and enter the DNS IP addresses provided by your ISP in the DNS fields.

4.Click the Gateway tab and enter a value in the Gateway IP address field. The Gateway IP address value must be thesame as the XRouter Pro's IP address. (the XRouter Pro’s default IP address is 192.168.1.1).

Figure 3.3-4

5.After specifying the settings of TCP/IP click OK and restart Windows to allow the set up to take effect.

10