Macsense Connectivity XRouter Pro user manual Device Administration

Chapter 4 - ADVANCED CONFIGURATION

4.4 Device Administration

This page displays information on the firmware version of the XRouter Pro. You can also change the password, reset the device, disable, or enable external administrative access to the web based configuration of the XRouter Pro, block WAN port scanning and WAN ping responses. (See Figure 4.4-1)

Figure 4.4-1

Block WAN Port Scanning: to block or allow external port scanning of the XRouter Pro, select Yes or No and then click Apply.

Block WAN Ping Response: to block or allow external pinging of the WAN IP of your XRouter Pro, select Enable or Disable and then click Apply.

Restore the XRouter Pro’s factory original defaults: select Yes and then click Apply.

External Admin Access: to enable or disable external admin access to the XRouter Pro, select Enable or Disable.

NOTE: IT is recommended to change the default “admin” password of your XRouter Pro for the security purpose. This is especially recommend if you intend to administer the router from outside your network and enable the External Admin feature.

22