Lucent Technologies Cajun M770 manual Adding Managers to the Managers Table

Page 19

Chapter 2 Agent Configuration

Open the Configuration menu and select Managers Table. The Managers Table dialog box appears.

Figure 2.2 Managers Table

The dialog box lists the IP addresses, node names of the Managers, and their trap reporting status.

Adding Managers to the Managers Table

To add managers to the list:

1Click on the IP address field and enter the IP address of the designated management station. When the change takes effect, the management station’s name will be displayed automatically in the Device Name column.

2Repeat the procedure for each manager.

3Click OK. The change takes effect immediately.

Note: The indicated manager will receive traps only when Trap Reports for that manager is enabled.

Removing Managers from the Managers Table

To remove managers from the list:

1Click on the IP address field and enter 0.0.0.0.

2Repeat the procedure for each manager.

3Click OK. The change takes effect immediately.

Cajun M770 Manager User’s Guide

7

Image 19

Contents Cajun M770 Manager Page Contents Cajun M770 Manager User’s Guide Cajun M770 Manager User’s Guide Iii Cajun M770 Manager User’s Guide Chassis View Toolbar List of FiguresList of Figures Cajun M770 Manager User’s Guide Table A.4 List of TablesList of Tables Viii Cajun M770 Manager User’s Guide Organization of this Manual Welcome to Cajun M770 ManagementPurpose of this Manual Who Should Use This ManualStarting Cajun M770 Management If you are using OpenView Solaris or Hpux or NT-OV Launching Module Managers Using Chassis ViewSelecting Elements Using the Toolbar ButtonsHelp Contents Using Configuration WindowsDownloading New Agent Software Agent ConfigurationGeneral Agent Installation and Configuration Verifying Agent InstallationViewing the Managers Table Designating ManagersRemoving Managers from the Managers Table Adding Managers to the Managers TableUpdating the Managers Table Device Configuration Device Information Dialog Box Viewing Device InformationHub Hardware Window Viewing Hardware ConfigurationModule Configuration Window Viewing Module ConfigurationPort Configuration Dialog Box Viewing Port ConfigurationDisabling Ports Enabling PortsDRUs Information Window Viewing Domain Resource Unit InformationClock Synchronization Dialog Box Viewing ATM Clock Synchronization ConfigurationDevice Configuration Resetting the Switch Resetting ElementsResetting the Device Resetting the AgentConfiguring Traps Fault ManagementAssigning Severity Degrees Unix and NT-OV Only Viewing TrapsEditing Severity Degrees System-Wide Editing Severity DegreesFault Management Performance Monitoring Ethernet Port Counters Window Viewing Ethernet Port CountersPort Error Counters Window Viewing Ethernet Port Error CountersPerformance Monitoring Cajun M770 Manager User’s Guide Port Mirroring Port Mirroring Dialog Box Accessing Port MirroringDisabling Port Mirroring Enabling Port MirroringChapter Port Mirroring Cajun M770 Manager User’s Guide Viewing Port Redundancy Information Port RedundancyEditing a Port Redundancy Adding a Port RedundancyDeleting a Port Redundancy Switch Connected Addresses for Device Window Switch Connected AddressesSaving the List of Stations Sorting the List of StationsCreating and Editing VLANs VLANsEditing Vlan Names and Numbers Accessing the Vlan ListEditing Vlan Member Ports Allowing Inter-VLAN Communication Cajun M770 Management Menus ConfigurationPerformance Help Cajun M770 Manager User’s Guide 10 of The Reference Guide Configuration FieldsDisable, use Internal Clock Clock E1Unframed E1Framed36 of The Reference Guide FDX+ISL Algorithm STA on page 27 of The Reference Guide Cajun M400 Manager User’s Guide Algorithm STA on page 27 of The Reference Guide Disabled Time to Restore field Counter Fields Cajun M400 Manager User’s Guide Trap Fields Cajun M400 Manager User’s Guide Index AccessingCajun M770 Manager User’s Guide Unix Cajun M770 Manager User’s Guide