Liebert EM manual Create a New User Account Administrators Only

Page 37

Getting Started With the Web Interface

5.6.2Create a New User Account (Administrators Only)

An administrator may create user accounts for up to 50 users, including the administrator account. Only users with administrative privileges may create user accounts.

To do this, log in as an administrator (see 5.1 - Open the Web Interface and Log In) and:

•Click on the Security tab to display the Security window, as shown below.

Security tab

User drop-down list

User box: enter name

Enter & confirm password

Access privileges

Inactivity timeout (automatic logoff)

•Choose Add New User from the User drop-down list.

•Enter a name for this user in the User box. The user name is case-sensitive and must be alphanu- meric (spaces are allowed).

•Enter a password for this user in the Password box. The password is also case-sensitive and must be alphanumeric (spaces are allowed). Verify the password by entering it again in the Confirm Password box.

•Specify the type of access privileges for this user by placing a check mark in the appropriate Access box:

•Read permits viewing only; users cannot make any changes, except to their own passwords.

•Write (includes Read access) allows access to all functions except other users’ accounts; users can view data, change configuration settings and change their own passwords.

•Administration (includes Read & Write access) provides full access to all functions, includ- ing creating and modifying other user accounts.

•Specify whether the Web interface will log off automatically after the computer is idle for a speci- fied time in the Inactivity Timeout drop-down list. The choices are Never or 1, 2, 5, 15 or 60 min- utes. This setting is applied to all users.

•Click Apply to make these changes effective. (To cancel the changes, click Reset.)

31

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Liebert OpenComms EM Page Table of Contents Pinout Guides Getting Started with the WEB InterfaceFigures Page Introduction Dimensions and Mounting Overview vEM-14 Controllers Dimensions and Mounting Overview EM & EM PDU ControllersPower and port indicators VEM-14see Table OverviewDescription of indicators and connectors Connectors on Back of UnitIndicators summary IndicatorsInstallation Installation ConsiderationsUnpacking and Preliminary Inspection Standard and optional components shipped with OpenComms EMMounting the Unit on a Wall EM / EM PDU Controllers Decide on Placement of the OpenComms EM44.5mm Horizontal mounting Vertical mounting Wall Mounting Mounting the Unit on a Wall or in a Rack vEM-14 ControllersRack Mounting Make Connections Use IPSET.exe to Assign an IP Address Consult Your Network AdministratorAssign AN IP Address Select a MethodUse Dhcp to Assign an IP Address Use ARP to Assign an IP AddressWEB Interface Overview Main Parts of the Web InterfaceAddress bar Tabs Device Identification Main display Links Color-Coded Status TabsSummary of tab functions Color coding used in Web interfaceExamples of sensor limits temperature and humidity sensors Temperature/Humidity Sensor ThresholdsThresholds in the Web Interface Dry-Contact Sensor ThresholdsExamples of sensor limits MP Advanced power strip sensors MP Advanced Power Strip ThresholdsAmps Name Current Value Color Buttons Sensor Names and StatusSensor information name and status Buttons in the Web interfacePassword Address bar Login window User NameOpen the Web Interface and Log Getting Started with the WEB InterfaceView Summary Data Update the InformationTypes of Information Exit the Web InterfaceSensors Window Configure SensorsSensors tab Names Names for sensors Create or Change Sensor NamesOn Sensor 1 port On Sensor 2 port Use these text boxesView Sensor Graphs Sensor graph humidity sensor example Zoom in Feature Humidity sensor exampleControl Receptacles Power Window EM PDU & vEM-14 ControllersControl All Receptacles With One Button Control Individual ReceptaclesPower strip port Receptacle to be linked On, Off, Reboot buttonsLink the Controls of Two Receptacles Linked receptacles PortPower tab Links to set thresholds Select a power strip Configure ThresholdsRefresh Critical & Warning limits Rearm Graph see Section Zoom in Feature Temperature sensor example View Power Strip GraphsCreate or Change Port Names Power tab Port namesAlerts Window Mail SetupModem Setup Snmp Trap Alerts Setup Security Window Security tab User drop-down list Enter & confirm passwordCreate a New User Account Administrators Only Modify an Existing Account Administrators Only Delete a User Account Administrators Only Change Password Users with Read/Write accessSecurity tab Enter & confirm password Security tab User drop-down list Delete buttonSys Info Window Default gatewayNetwork Connectivity Sys Info tabSnmp Information Data Presentation Serial Ports Contact Closure Cable Pinout Guide Modem Setup and Pinout GuideSerial Cable Pinout Guide EM PDU & vEM-14 Controllers Pinout GuidesDownloading Firmware Updates OpenComms EM specifications SpecificationsPage Iti Ne tTi n That

EM specifications

The Liebert EM is a state-of-the-art, modular and scalable cooling solution designed to meet the needs of today's data centers and IT environments. This innovative unit offers unmatched precision and flexibility, making it ideal for facilities that require meticulous temperature control and energy efficiency.

One of the main features of the Liebert EM is its modular design, allowing for easy expansion and customization based on the specific requirements of a facility. This scalability ensures that organizations can efficiently adapt to changing cooling demands without the need for significant infrastructure changes. The system can be configured in various capacities, making it suitable for spaces of different sizes and cooling needs.

Incorporating advanced technologies, the Liebert EM utilizes inverter-driven compressors, allowing for variable refrigeration capacity. This feature optimizes energy consumption, reducing operational costs while maintaining precise temperature control. The unit is designed with built-in smart controls that enable real-time monitoring and adjustments, ensuring enhanced performance and efficiency across the entire cooling system.

The Liebert EM also comes equipped with EC (Electronically Commutated) fans, which contribute to its energy efficiency by adjusting their speed according to the cooling load. This not only ensures adequate airflow but also minimizes energy waste, leading to lower overall operating costs.

Furthermore, the system features intelligent connectivity options that facilitate integration with existing building management systems. This capability allows for centralized monitoring and control, empowering facility managers to maintain optimal conditions and respond quickly to any fluctuations in temperature or humidity.

Safety and reliability are also paramount in the design of the Liebert EM. The unit includes comprehensive backup systems and redundancy features to ensure continuous operation even in the event of a component failure. This reliability is crucial for critical applications where downtime can result in significant losses.

In summary, the Liebert EM stands out as a versatile and high-performance cooling solution, equipped with advanced technologies that offer scalability, energy efficiency, and precise temperature control. Its modular design, coupled with intelligent control options, makes it an essential component for modern data centers looking to optimize their cooling infrastructure while ensuring reliability and reducing operational costs.
Top Page Image Contents